|
|
 |
|
|
 |
|
|
|
|
|
|
[Features][Display][Description][Material][Power Supply] [Operation][Logging][Kit Contents][Warranty] |
|
|
The StressTel T-Mike EL is a compact, easy-to-use and rugged thickness gauge. The T-Mike EL has an on-board datalogger capable of storing over 40,000 readings in user definable data files. Thickness readings are stored by simply pressing the ENTER key. Readings can be sent directly to a printer or downloaded to a PC with the supplied software.
The T-Mike also features high speed scanning for minimum thickness capture; a B-scan display for graphical representation of thickness over time; an adjustable alarm illuminates LEDs to alert the operator when thickness values are above or below a set value; and a DIFF function displays the positive or negative difference between the thickness measurement and preset value.
Other key features include: auto calibration; sealed case; amber colored display; measuring range of 0.025 inch to 19.999 inch; 300 hours battery life with (4) alkaline or NiCad "AA" batteries and two year warranty. |
|
|
|
|
|
The T Mike EL is supplied with a 1/4" x 5 MHz dual element transducer. The transducer has a potted four-foot, wear resistant cable with lemo quick disconnect connector. StressTel offers a wide range of other transducers to meet your application requirements. |
|
|
|
|
|
|
|
|
|
|
|
|
|
Unit Features |
|
|
|
|
1. |
Lemo quick-disconnect connectors. |
|
2. |
Bi-directional RS 232 data port/battery charger connector. |
|
3. |
Built-in auto-probe zero block. |
|
4. |
Coupling indicator. |
|
5. |
Alarm indicator indicates alarm active. |
|
6. |
Current data file. |
|
7. |
Amount of memory available. |
|
8. |
Red alarm LED indicator. |
|
9. |
Clears stored reading and entire memory. |
|
10. |
Arrow keys for changing location within a file. |
|
11. |
Power key. |
|
12. |
Accesses files. |
|
13. |
Stores readings. |
|
14. |
Accesses calibration and memory modes. |
|
15. |
Stored thickness reading |
|
16. |
Reading location. |
|
17. |
Digital thickness reading. |
|
18. |
Operator selectable Metric or English units. |
|
19. |
Backlit LCD indicates modes, measurements, icons and B-scan. |
|
|
|
|
Display |
|
|
|
|
Measurements: |
4 1/2 -digit amber backlight LCD. |
|
Coupling Check: |
NO ECHO display. |
|
Battery Check: |
LOW BAT display flashes to indicate battery replacement. |
|
Units: |
English/Metric selectable
IN or MM displayed |
|
|
|
|
Description |
|
|
|
|
Unit size: |
2.5 inches wide (64 mm)
6.0 inches long (152 mm)
1.25 inches deep (33 mm)
14 ounces (397 grams) |
|
Case: |
Sealed aluminum case. |
|
Keyboard: |
Water resistant keypad. |
|
|
|
|
Material |
|
|
|
One step calibration for steels, aluminum, metals, glass and plastics. |
|
|
|
Power Supply |
|
|
|
Four AA alkaline or NiCad batteries that are interchangeable and easy to access.
Approximately 300 hours of continuous operation - 80 hours with backlight. |
|
|
Operation |
|
|
|
|
|
|
|
Measuring range: |
0.025 to 19.999 inches (.635 mm to 500 mm) depending on transducer, surface condition, temperature and material. |
|
Display resolution: |
0.001 inch ( 0.01mm). |
|
Material velocity range: |
0.01 to 0.59 inches per micro-second. |
|
Allowable surface temperature: |
0° F to 300° F (-18° C to 150° C).
High temperature probes available to 650° F. |
|
Scan Mode: |
Displays minimum thickness during scanning. |
|
Red LED: |
LED illuminates when a reading falls below set target range. |
|
B-Scan: |
Provides graphical representation of thickness variations. |
|
Diff: |
Displays positive or negative difference to preset value. |
|
|
|
|
|
|
|
|
|
|
Data Logging |
|
|
|
|
Configuration: |
Alpha numeric identification of files, locations and comments. |
|
Memory: |
Stores over 40,000 readings in over 100 files. |
|
Communication: |
Bi-directional RS 232 serial interface with selectable baud rate. |
|
|
|
T-Mike EL Kit Contents |
|
|
|
|
* |
T-Mike EL Ultrasonic Thickness Gauge |
|
* |
1/4" x 5 MHz Transducer (style user selectable from list). |
|
* |
Operation Manual. |
|
* |
DataTel Program Disk. |
|
* |
Data Transfer Cable. |
|
* |
25/9 pin Connector/Adapter (for use with cable). |
|
* |
Couplant. |
|
* |
Four "AA" Batteries (Alkaline or NiCad). |
|
* |
Battery Charger (if NiCad battery operated). |
|
* |
Plastic Instrument Accessory Case. |
|
* |
Certificate of Calibration. |
|
|
|
|
Warranty |
|
|
|
All T-Mike Corrosion Thickness Gauges have a full two-year warranty on parts and labor excluding batteries, transducer and cable. Specifications subject to change without notice. |
|
|
|
Back to Top |
|
|
