The ELITEpro™ is a recording PolyPhase power monitor.  It can monitor up to four single-phase loads or two three-phase Delta loads, or one three-phase Wye load.  The ELITEpro™  includes 4 channels of current (0-6000A), and 3 channels of voltage (0-600V ac or dc). It measures Volts, Amps, Watts, Volt-Amps (VA), Volt-Amps Reactive (VAR), Kilowatts (kW), Kilowatt Hours (kWh), Power Factor, and Harmonics (1st - 63rd). The ELITEpro™   also offers some power quality features such as the ability to view voltage, current, and power waveforms.  It will calculate harmonics from DC through the 63rd then report total harmonic distortion (THD), crest factor and peak voltage & current.

TYPICAL APPLICATIONS

• Load Profiling and trending to forecast energy use,

• Sub-Metering for accurate accountability to tenants with kWh (usage), kW (demand) with peak data and time, real-time load in kW, per phase voltage and amperage display,

• Interval Data Recording for data sampling, storage, analysis, and presentation,

• Measurement & Verification where baseline studies are required prior to upgrading then followed with a verification study to measure results,

• Power Quality Monitoring for supply engineers and end users with the ability to look at the physical characteristics of delivered electricity,

• Energy Surveys enabling end users to determine demand profiles and manage energy costs and consumption,

• Demand & Power Metering when doing performance contracts.

TYPICAL ENERGY LOAD APPLICATIONS

• Building service entrance,

• Main or distribution panels,

• Heat pumps,

• Fans,

• Motors (VFD & VSD),

• Lighting loads,

• Chillers,

• HVAC,

• Arc furnaces,

• Generators,

• Compressors,

• Elevators & escalators,

• Medical equipment,

• Marine dock-side.

FEATURES & BENEFITS

• Versatile . . . one monitor to measure single or three phase loads, AC or DC,

• Smart . . . measures kWh, kW, Volts, Amps, kVA, kVAR, Watts, VA, VAR, Power Factor, wave form capture & harmonics content,

• Programmable . . . user defined recording intervals of 3, 15,30 seconds, 1, 2, 5, 10, 15, 20, 30 minutes, and 1, 12, 24 hours and the ability to select maximum, minimum, average, instantaneous, or all parameters,

• Powerful . . . with expandable memory form 128kB (~25,000 records) to 512kB (~100,000 records) allowing for months of recording,

• Accurate . . . better than <0.5% accuracy,

• Easy communications . . . via direct RS232 hookup or via internal modem allowing for remote communicating over land lines or cellular networks including AutoHost and AutoPoll capabilities,

• Switchable power . . . battery or line power providing options in varying installation applications,

• Window based software package . . . ELOG™  software for ease of programming, set-up, communicating, data retrieval and analysis.  Various analysis and graphing features with easy exporting to any ASCII format data file like Excel,

• Cleaver . . . alarm capability to detect, download data and notify the user once predetermined high or low points are meet within any measurement parameter,

• Quick and easy installation . . . installs within minutes and is equipped with strong magnetic strips for securing inside electrical panels,

• Compact and tough . . . made of heavy plastic, only 3" x 6" x 2" and just 12 ounces to easily fit inside tight enclosures,

• Weather beater . . . available in weather tight enclosure to meet stringent NEMA 4 applications,

• Acceptance . . . UL Listed for USA, Canada & Mexico and CE compliant for Europe,

• Budget beater . . . priced way below most power quality meters.

New Power Quality Software The ELOG™ software is used to program the logger, display real-time metered values, and retrieve, analyze, and present the data. The WindowsTM software package graphically displays harmonics and waveforms, performs analyses and allows automatic, remote data collection. For more info click here

Easy Installation The ELITEpro™ can easily fit inside most electrical cabinets, which eliminates problems associated with external metering. It weighs only 0.7 Kg (21 ounces), excluding cables and voltage sensors. Dimensions are: 8 x 15 x 6 cm (3.2" x 5.9" x 2.4") Weather-Tight  option: 17.1 x 12.1 x 8.3 cm                                     (6.75" x 4.75" x 3.25")

ELITEpro™ Communication Package (part number EU-COM-PAK-D) comes complete with ELOG™ software, RS-232 null-modem communication cable, and an operations manual.

POWER MONITORING SPECIFICATIONS

The ELITEpro™ can monitor up to: four single-phase, 2 wire loads or two three-phase, 3 wire loads, or one three phase, 4 wire load. A variety of voltage taps are available including; crocodile clips, fused crocodile clips, or shark clips.  Current sensors come in a variety of amperage ratings and include; split core, clamp-on, and flexible types.

Inputs 4 channels of current, 0-6000A 3 channels of voltage, 0-600 V ac or dc Power Volts, Amps, Watts, Volt-Amps, Volt-Amps-Reactive, Power Factor Measurements True RMS Frequency 50 or 60 Hz Accuracy <1% of reading exclusive of sensor accuracy Baud Rate 1200 - 57,600 Resolution 12 bit (1 part in 4,096); 0.1 Volt, 0.01 Amp, 1 Watt, 1 VAR, 1 VA, 0.01 PF Memory 128k (25,000 readings) or 512k (100,000 readings)

Sampling Frequency 7.68 kHz (128 points per waveform) Recording Intervals 3, 15, 30 seconds; 1, 5, 15, 30, 60 minutes; and 12, 24 hours Recording Events Average, minimum and maximum Real Time Clock 20 ppm accuracy (<1min/month) Operating Temperature -7 to 60C (20 to 140F) Battery Life 3-10 years@ 1 min. sampling, with LED indicator of low battery charge Harmonic Analysis to the 63rd Harmonic

FACTORY OPTIONS

WEATHER-TIGHT ENCLOSURE

The Weather-Tight version is rated NEMA 4,  intended for indoor or outdoor use primarily to provide a degree of protection against windblown dust and rain, splashing water, and hose directed water; undamaged by the formation of ice on the enclosure.  Allow the ELITEpro™ to operate in harsh, wet, and outdoor environments.

Internal Modem:   The ELITEpro™ can come equipped with a built-in internal modem. This will enable easy remote data collection and changes to the program.  One of the more advanced benefits of  the internal modem is the AutoPoll and AutoHost  features. 

AutoPoll, short for Automatic Polling, is a separate program that comes bundles with ELOG2001™ and is loaded onto the PC with software installation.  AutoPoll is the application that directs the PC to call the logger and may be used for unattended and automatic data retrieval from a number of remote loggers where the PC calls the loggers.  

AutoHost, short for Automatic PC Host, allows the ELITEpro™ to initiate telephone data retrieval sessions.  AutoHost is the application that answers the call from the logger and collects the data.

High Memory: High Memory is one option you'll want if you don't have telephone lines available. The high memory option quadruples the logger memory to 512 kbytes (100,000 records) allowing for long periods before downloads are necessary.

SHUNTED CURRENT TRANSFORMERS for SAFE and PRECISE METERING:   The ELITEpro™connects directly to CTs with a 333 milli-volt output. A wide variety of split core, clamp-on, and flexible CTs (shown at left) are available. They range from 5A up to 6000A.

ELOG Software

To have a more detailed look at the software simply click here.

Manufacturer's Declaration of Conformity

HARDWARE CONNECTIONS

For a look at a typical, 3-phase Delta configuration for a motor using the ELITEpro™, click the image below

CURRENT TRANSFORMER CONNECTIONS

For additional information about connecting Current Transformers to loggers click here