24 bit A/D converter.
	ProFlash upgradeable firmware.
	MAS™ Windows based software.
	512 Kilobyte non volatile memory. (Approx 400,000 samples)
	4.3"x2.3" (100mmx60mm) LCD screen.
	Long-life Nicad battery pack.
	RS232 Interface with cable.
	3 Year Warranty (on instrument only).

Temperature monitoring has been a task relegated to simple and unexciting chart recorders. Think temperature recording and you think clumsy boxes that require constant attention with paper and pen refills. This is no longer true with the MMS3000-T4. The MMS3000-T4 is the low-cost temperature-dedicated product in the revolutionary MMS3000 series. With the MMS3000-T4 you can take extended recordings of up to 9,999 readings, and up to 60 hours between samples. The result is a test that can last weeks without the need to touch anything. Once finished, simply connect the unit to a standard PC and within minutes your data is easily downloaded for further analysis using MAS™, our Windows based data manipulation software. Do you need to review temperature data in the field or on the plant floor away from a PC? Then the MMS3000-T4 is the instrument of choice. The large LCD enables you to graphically review recorded data simply by pressing a few keys. Windows based software for flexible data manipulation. Producing a variety of graphs and printout options.

	User Manual
	Product Specification PDF Document
	Software/Firmware

ITEM	SPEC	REMARKS
	Model: MMS3000-T4 Incorporating 4 Temperature Channels
TEMPERATURE RANGE
T Type Thermocouple	-418 to +743°F (-250 to +395°C)	Operating temperature range
E Type Thermocouple	-418 to +1823°F (-250 to +995°C)	is determined by operating
J Type Thermocouple	-346 to +2183°F (-210 to +1195°C)	range of thermocouple
K Type Thermocouple	-418 to +2498°F (-250 to +1370°C)
TEMPERATURE RESOLUTION
	Above -148°F (-100°C): 0.1°F or °C
	At or below -148°F (-100°C): 1°F or °C	Effective resolution decreases at or below -148°F (-100°C)
TEMPERATURE ACCURACY
	Above -148°F (-100°C): ?.1% of reading ?.9°F (0.5°C) At or below -148°F (-100°C): ?% of reading ?.9°F (0.5°C)	Total measurement accuracy depends on MMS3000-T4 and thermocouple accuracy. Only MMS3000-T4 accuracy is given here. MMS3000-T4 temperature 73 ?9°F (23 ?5°C), charger off. See Appendix 3 of Owners Manual
MINIMUM SAMPLING INTERVAL
	# of channels selected (User-selectable) Minimum sampling interval (seconds) 1 0.2 2 0.3 3 0.5 4 0.6	Sampling interval is programmable from 0.2 seconds to 60 hours Note: Minimum time to scan all selected channels - not each channel
DATA LOGGING
Data Storage	512 kilobytes ?approx. 400,000 individual samples	Non-volatile memory (with battery back-up). # of Samples depends on # of Data Sets and Recordings.
Data Storage Format	Up to 50 named DATA SETS	User-specified name entered from keypad
	Up to 50 RECORDINGS per data set	Each recording has unique time/date stamp
	Up to 9,999 SAMPLES per recording	Each sample contains data for all selected channels
Data Set Name	Up to 16 alpha-numeric characters
DISPLAY
	LCD with graphic capabilities
Resolution	240 x 128 pixels
Viewing Area	4.3" x 2.3" (110mm x 60mm)
Backlight	Electro-luminescent
PROFLASH
	Allows internal firmware to be upgraded via built-in RS232 port	Download firmware upgrades via the Internet
COMMUNICATIONS
	RS232	15kV ESD Protected. Cable with DB9 connector included
Baud Rate	9600, 19200, 57600 bits per second	Automatic Baud Rate Selection
INPUT TERMINATION
	Sockets accept miniature thermocouple twin blade plug	Blades spaced 5/16" (7.9mm) center-to-center
INPUT IMPEDANCE
	Greater than 100k Ohms	Terminal-to-terminal
ISOLATION
	50VDC minimum	Between temperature inputs and MMS3000-T4 outputs e.g. RS232 port. No isolation between input channels.
BATTERY
Type	Custom Nickel-Cadmium pack
Voltage	7.2 Volts nominal
Capacity	1500 mAh nominal
Operating Time	13 hrs with backlight off, 7 hrs backlight on - nominal
CHARGER AND CONDITIONER
	Built-in dual rate charger ?Automatic and Manual control	AC Adapter included (13.5 ?1.5 VDC, 1A output)
Fast Charge Rate	0.7A nominal	2.5 hours for complete charge nominal
Discharge Rate	0.5A nominal	Combats NiCad battery memory effect
MECHANICAL
Size	9.7"W x 6.1"L x 3.0"H (247mm x 154mm x 75mm)	Including protective boot
Weight	4.4lb (2kg)	Including protective boot and strap
ENVIRONMENTAL
Temperature/Humidity
Operating	32°F to 122°F (0°C to 50°C) / 70% RH	Non-condensing
	32°F to 86°F (0°C to 30°C) / 80% RH	Non-condensing
Storage	14°F to 140°F (-10°C to 60°C ) / 95% RH
EMC	EN50081-1	Radiated and conducted emissions
	EN50082-1	ESD Immunity and RF field immunity (EMI).
The manufacturer reserves the right to modify specifications without prior notice.