TM1-D


	[ Features] [Display] [Description] [Material][Power Sup ply] [Operation] [Warranty]

The TM1-D ultrasonic thickness gauge is specially designed for measurement of precision machined and formed steel metal components with a measurement range of 0.006 to 0.300 inches (0.15mm to 7.6 mm). TheTM1-D is compatible with a wide variety of single element delay transducers for optimum measurement performance.

Special TM1-D features include large backlit LCD display; durable metal case; weather resistant keypad; and DIFF function that displays the positive or negative difference between the thickness reading and preset value are all special features of the TM1-D.


	Unit Features:



	Display:

1.	Lemo quick-disconnect connector.
2.	Backlit 5-digit LCD indicates modes and measurements.
3.	Durable, lightweight, aluminum case.
4.	Weather resistant, sealed keypad.
5.	Power key.
6.	Serial port for optional printer.
7.	Battery charger connector.
8.	Operator selectable English or Metric units.
9.	CLEAR last reading.
10.	DIFF key enables display of positive or negative difference to preset value.
11.	Material calibration key.
12.	DATA SEND Key for transmission of current reading to optional printer.

Measurements:	5-digit backlight LCD.
Coupling Check:	NO ECHO LCD display.
Battery Check:	LOW BAT LCD display.
Differential Mode:	DIFF LCD display.
Units:	English/Metric selectable IN or MM displayed


	Description:

Unit Size:	3.5 inches wide (89 mm) 6.25 inches long (159 mm) 1.5 inches deep (38 mm) 20 oz. (567 grams)
Case:	Weather-resistant, aluminum.
Keyboard:	Sealed keypad.


	Material:

	One step calibration for steels, metals, glass and plastics.

	Power Supply:

	Five "AA" Alkaline batteries. Optional NiCad battery pack. Approximately 120 hours of continuous operation.

	Operation:

Measuring Range:	0.006 to .3000 inches (0.15 mm to 7.6 mm)
Display Resolution:	0.0001 inches (0.01 mm)
Material Velocity Range:	0.200 in. per micro second to 0.55 inches per micro-second.
Allowable Surface Temperature:	0° F to 130° F (-18° C to 54° C ).

Transducer:

Configuration Description:	15 MHz, 0.25 inch active element diameter. Full range available.
Connection:	Lemo quick-disconnect.
Configuration:	Single-element delay tip probe.
Cable:	4 foot evironment protected.

TM1-D Kit Contents

*	TM1-D Ultrasonic Thickness Gauge.
*	1/4" - 15 MHz Delay line for Thin Metals.
*	Lemo-MD Cable Assembly.
*	Operation Manual.
*	Screwdriver.
*	Couplant.
*	Battery Charger (if NiCad battery operated).
*	Plastic Instrument Accessory Case.
*	Certificate of Calibration.

Warranty

All precision thickness gauges have a full two-year warranty on parts and labor excluding batteries, transducer and cable. Specifications subject to change without notice.