| @VIBROMETER MK-10L FOR MULTI
PURPOSE |
SAFETY CONTROL,QUALITY CONTROL,RESEARCH,ETC.
Specifications
| Components |
Mainbody
|
| Model/Type |
MK-10L |
| Measuring mode |
Displacement,
Velocity and Acceleration, any of switching-over |
| Measuring
range |
Mode |
Full scale |
Frequency range |
| Displacement |
1999Κ
[0.0787in] *1 |
10Hz`250Hz
|
| Velocity |
19.99cm/s
[7.87in/s] *1 |
10Hz`1kHz |
| Acceleration |
19.99G |
1kHz`40kHz *2 |
| Display
|
LCD
3 1/2 digit
45.8~12.7mm(1.80~0.5in) |
| Power |
DC9V
(one alkali dry battery), 15 continuous hours operation |
| Protection |
Scale-over display
Low-battery display
Automatic-power-OFF |
: 1"is displayed on LCD.
: Three dots c"are displayed on LCD.
: Power supply is turned off automatically about two minutes
@after the stop of operation. |
|
| Dimensions |
80(W)~145(H)~40(D)mm(3.15~5.71~1.57in) |
|
|
|
Operating temperature
Storage temperature |
0`50(32`122F)
-20`60(-4`140F) |
|
| Pickup : Piezoelectric acceleration detector
|
| Model PU-601R |
| Mounting |
Cable |
|
@Via contact rod
@(no limitations on
@contact angle)
@Magnet or screw
@mounted
|
@Curl
cord max length
@1m long,
@Pickup, extension cable
@available as option |
|
Environmental
resistance |
Oil-, water-,
and dust-resistance |
|
Dimensions
Weight |
Σ38~85mm(Σ1.50~3.35in)
170g (0.37lbs) |
|
Operating
temperature |
-10`80(14`176F) |
|
|
Standard components
1. Main body MK-10L
2. Vibration pickup PU-601R with cable
3. Contact rod(L=102mm)
4. Alkali dry battery 006P
5. Storage case
6. Instruction manual
Optional accessories
1. Magnet MH-24(12kg) |
@
1 set
1 pce.
1 pce.
1 pce.
1 pce.
1 pce. |
|
|
| *1 |
"in", "in/s"
are not displayed on LCD |
| *2 |
Regarding our hand-held type pickup
and magnet fixed type pickup,
values of output signals are compensated in order to get
the better reproducibility over the freguency level of a few
kHz.
Therefore, freguency characteristics of output signals are not
flat. |
|
Examples
| Industries |
Main purpose |
Various uses |
| Manufacturing, processing |
Measurement, Inspection |
Machine tools and equipments diagnosis |
| Services |
Maintenance, Inspection |
After services, Prior-consultant |
| Transport |
Maintenance, Inspection |
Vehicles, Substation |
| Construction |
Maintenance, Inspection |
Aseismatic construction |
| Laboratories |
Research, Inspection |
Trial₯Plot products,Public nuisance |
| College |
Teaching, Study |
Seminar, Experiment |
| Government authorities |
Research, Inspection |
Administrative guidance for
standards |
|
|
Defective influence
of various vibration and treatments |
|
Measuring points
and directions for vibration inspection |
 |
 |
|
| |
Machine diagnostics
through vibration measurement |
| |
Example of Machine diagnostics
through vibration velocity measurement |
| Type
of troubles diagnosable |
Velocity
value |
Judgement |
| Unbalance,
bent shaft, coupling misalignment, oil whip, play etc. |
Less than
3mm/s
[0.12in/s] |
Satisfactory
|
3to10mm/s
[0.12to0.39in/s] |
Requires attention
|
More
than 10mm/s
[0.39in/s] |
Incomplete |
| |
Example
of machine diagnostics through vibration acceleration measurement
|
| Type of troubles
diagnosable |
Acceleration
value |
Judgement
|
| Roller
bearing damage, gear tooth damage, fluid leak, etc. |
Zone
A |
Satisfactory |
| Zone
B |
Requires
attention |
| Zone
C |
Incomplete |
|
| Specifications may be changed without notice due
to proceeding improvements |
*Zones A,B and C are to be determined for the individual
machines |
|