Specifications Performance ● Display wave patterns on time scale ● Transient recording (memory capacity max.32k words) ● Linear spectrum ● Three-dimensional display of spectrum ● 10 largest spectra chosen and displayed ● Automatic diagnosis: imbalance, misalignment, abnormal bearing, damaged gear, play, loosening, trouble of Pump･Motor ● Field balance ● 1/3 Octave analysis(MK-500D only) ● Probability density function(MK-500D only) ● Probability distribution function(MK-500D only) ● Differential and integral of spectrum(MK-500D only) Input unit Input channel One channel Input impedance 1MΩ(voltage input) Input coupling Vibration/AC(3Hz,-3dB) Voltage/AC(2Hz,-3dB),DC Attenuator range Vibration/displacement 50,150,500,1500, 5000μmP-P Velocity 0.5,1.5,5,15,50cm/s O-P Acceleration 0.5,1.5,5,15,50G O-P ENV 0.5,1.5,5,15,50G O-P Voltage/AC/DC ±0.1,0.5,1.5,10,50V Audio sound 80,100,120dB Flat Low pass filter (Vibration input only) Cut-off frequency 1kHz,40kHz,None High pass filter (Vibration input only) Cut-off frequency 2Hz,5Hz,10Hz,1kHz,5kHz Input terminal �@Vibration input(metal receptacle)/vibration pickup PU-616B handheld(standard) �AVoltage input (BNC)/for sound analysis Micro-phone (option) Trigger mode Free-run mode, repeat mode, single mode Trigger level Continuously variable within the range of vibration and voltage Trigger polarity Positive or negative Trigger point Setting available between -1,024+1,024 points (1G=9.80665m/S 2) Analysis unit Frequency range 10,20,50,100,200,500,1k,2k,5k,10k, 20k,50kHz...12ranges Number of sampling points 1,024points Frequency resolution 1/400 of analysis range Spectral lines 400(LCD display) Dynamic range 60dB and larger A/D resolution 12bit/word Sampling frequency 2.56 timcs the analysis frequency range Window function Hanning, Hamming, Rectangular Average mode Linear average on frequency axis Number of averaging 2,4,8,16 and 32 times Anti-aliasing filter Butterworth-48dB/oct or larger Display unit Display method LCD graphic (with back light) Display dimension 62×230mm(2.44×9.06ins) (128×480dots) Field of vision Angle can be changed by control volume X-axis scale Frequency or time(linear) Y-axis scale Level(linear and logarithm) Display by letters Input, analysis, diagnosis, condition Output unit Output Analog output(wave pattern) Digital output(RS-232C) Memory unit ● Transient memory(capacity 32K words) ● 240 display pictures of analysis data can be stored (which may be brought back to the office for data processing being backed up by batteries) ● Panel condition memory (when the power source is made OFF and then ON, the setting conditions at the time of power OFF is automatically reestablished) ● 240 display pictures per memory card can be stored.(option) Warning and protection unit ● When an abnormal condition is found as a result of automatic diagnosis, warning sound is issued. ● Low battery warning sound is reduced to 11.0V and lower,a mark on LCD flickers. ● Battery level display General specification Internal power Seal type lead battery 12V/2.2Ah External power Commercial AC source (any voltage upon request) DC11.5〜30V,0.8A Power consumption Approx, 4W Continuous operation 5.5h or more (for nomal usage) Operating temperature 0〜40℃(32〜104°F) Storing temperature -10〜60℃(14〜140°F) External dimensions 295(W)×236(D)×135(H)mm (11.61×9.29×5.31ins) Weight Approx 5.0kg(11.02lbs) (including battery) Standard setup ● One MK-500 with carrying case ● One vibration pickup : selected from the three choices -1 Magnet type PU-616B with 5m cable -2 : Magnet type PU-626B with 5m cable -3 : Handy type PU-601R with 1m cable ● One AC adaptor, also applicable to battery charger ● Operation manual Option ● Printer : DPU-201GS ● Memory card : MK-8210 ● Microphone for audio sound : EMU-4535 �U ● LED Detector for Field Balancing with fixing magnetic stand: CRD-300CN ● Magnet for pickup

back